
5 Installer Programming
5-17
NA CP EU
ON OFF
1
999
Siren Alarm Enabled Siren Alarm Disabled
2
99
Buzzer Notifications Enabled Buzzer Notifications Disabled
3
99
Door Chime Enabled Door Chime Disabled
4
99
Trouble Beeps Enabled Trouble Beeps Disabled
5 Squawks Enabled Squawks Disabled
6
9
Enable Strobe Disable Strobe
7
9
Buzzer Alarm / Strobe Follows BTO Buzzer Alarm / Strobe Follows Alarm Condition
8
9
Siren Tamper Enabled Siren Tamper Disabled
NA CP EU
ON OFF
1 Tamper Activates Siren/Strobe While Armed Tamper Doesn't Activate Siren/Strobe While Armed
2 Pre-Alarm Signal Enabled Pre-Alarm Signal Disabled
3 For Future Use Strobe Squawks Disabled
4 For Future Use
5 For Future Use
6 For Future Use
7 For Future Use
8 For Future Use
NA CP EU
ON OFF
1
For Future Use
2
For Future Use
3
For Future Use
4
For Future Use
5
For Future Use
6
For Future Use
7
99
RF Jam Disabled RF Jam Enabled
8
999
Global Module Placement Test Individual Module Placement Test
Valid Entries (001-255) minutes
[804][320] Global Siren Options
•
•
Indicates Dynamic Addressing
•
•
[
851][003] Ethernet Gateway IP Address
010
Opt
Opt
These sections are programmed using Connect 24 (NA) or DLS IV (International). For more information regarding the
availability of these programming sections, refer to the TL/GS manual.
[804][314] Wireless Siren #04 Options
Valid Entries are 0000-FFFF Seconds (E.g. 0087 = 135 seconds)
•
NA
[804][330] Maximum Outdoor Siren Activation Timer
010010
CP
[851] GPRS/Ethernet Module Programming
Def
192.168.0.99
Def
•
[851][002] Ethernet IP Subnet Mask
[851][001] Ethernet IP Address (Programmed)
i
0.0.0.0
255.255.255.0
[804][900] General Wireless Options
Opt
EU
•
0087
Def
•
Def
0.0.0.0
[851][004] Heartbeat Interval
•
Komentarze do niniejszej Instrukcji