Alexor PC9155D-433 Instrukcja Użytkownika Pobierz pdf (Strona 12)

to have this programmed. The Master code cannot use the Bell/Siren Squawk attribute, but the

code is required to enable the Bell/Siren for other codes.

NOTE: This feature cannot prevent the Arm/Disarming squawks from being generated if an

access code assigned to a wireless key is manually entered at a keypad.

Erasing an Access Code

To erase a code, select the code and enter as the first digit. If is entered, the system will

delete the code (including the associated prox tag) immediately and the user will be returned to

select another code.

Proximity Tag Enrollment (PT4/PT8)

Proximity (prox) tag readers are only available on WT5500P keypads. Refer to the label on top of

the keypad to confirm which model you have.

Enrolling Proximity Tags

1. Enter [

][5][Master Code] to enter User Code Programming.

2. Scroll to the desired user code (01-16, or 40 for the master code) then press [

].

3. Enter your desired 4 or 6-digit user access code. The following message will be displayed

after the user access code is entered:

Present Tag or

Press # to Exit

4. Place the prox tag near the tag reader ( ) at the left side of the display to assign it to the user

code. The following message will be displayed:

Tag Enrolled

Successfully

If an attempt is made to assign a prox tag to an existing user code that has an associated prox

tag, the following message will be displayed:

Duplicate

Tag/User Code

Return to Step 2 for instructions on how to enroll a user code.

NOTE: To exit the process at anytime, press [#].

Erasing a User Code/Proximity Tag

Enter [

][5][Master Code], select the desired user code. Enter [] to erase the code and associ-

ated prox tag. The keypad will display the user number (e.g., 01) with a letter “P” if a user code

has already been programmed and a letter “T” if a code and prox tag have been programmed.

NOTE: User 40 for the master code cannot be deleted; an attempt to delete this user code will

delete the prox tag only. The prox tag must be re-enrolled before it can be used again.

Proximity Tag Operation

Place the prox tag near the tag reader

() at the left side of the display to arm/disarm your sys-

tem. When arming the system, the following message will be displayed:

Exit Delay in

Progress

When disarming the system, the following message will be displayed:

System Disarmed

If there is an attempt to swipe a prox tag that has not been enrolled, an error tone will sound and

the following message will be displayed:

Invalid Tag

Return to Step1 for instructions on how to enroll the prox tag.

WARNING: KEEP THE PROXIMITY TAG OUT OF REACH OF SMALL CHILDREN. THE MATERIALS ASSO-

CIATED WITH THIS PRODUCT (LITHIUM BATTERIES, ETC.) MUST BE RECYCLED ACCORDING TO LOCAL

RULES AND REGULATIONS.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

Alexor PC9155D-433 Instrukcja Użytkownika Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Alexor PC9155D-433